Semi insulated aluminum bus tube pipe

 Tip: Click on the image to enlarge
1.Semi insulated aluminum aluminium bus tube pipe
1) Implementation standard: GB/T27676-2011 aluminum and aluminum alloy bus tube pipe conductor or ASTM B 317M-07
2) Product Alloy:6Z63 6063G  6R05  6101 6061 3A21 1060 1070A
3) Product Temper: H18  T10  T6  T6511
4) The product is hollow tubular structure with glossy surface, beautiful appearance and uniform size.
5)The outer diameter is from 60mm to 450mm.
6)The Wall thickness from 3mm to 15mm.
7) The length of a single bus tube pipe conductor can reach up to 15 meters.
 
2.Scope of application of Semi insulated aluminum aluminium bus tube pipe
Semi insulated aluminum aluminium bus tube pipe is suitable for power supply, power generation, gold treatment, petroleum, chemical, energy and other distribution projects. Its advantages such as small installation area, large carrying capacity, high safety factor and convenient maintenance have been accepted by the majority of users. The main installation methods are: pillar overhead, cable interlayer, cable trench etc.
 
3,Product features of Semi insulated aluminum aluminium bus tube pipe
1. Super current-carrying and heat-dissipating capacity: the main body is hollow aluminium tube, the current distribution is uniform, the maximum rated current can reach 4000A.
2. Low skin effect, low power loss: low AC resistance, skin factor KF < 1, so the loss of tubular buses is low.
3. Large allowable stress and high mechanical strength: tubular bus tube pipe is four times as long as rectangular bus tube pipe, and the longest span of single bus tube pipe can be up to 8 meters.
4. Electrical insulation performance is strong: adopt the pillar porcelain bottle insulation way, can go straight through the cable trench or through the wall.
5. Simple structure, high reliability: no internal condensation, no inter-phase, ground short-circuit factors, one installation lifelong maintenance-free.
 
4,Common tubular busbar, Liner tube & sealing ball size or sealing cover size.
Main Bus Pipe Tube Liner Bus Pipe Tube Sealing ball  or
Sealing cover
OD
(mm)
Wall Thickness
(mm)
OD
(mm)
Wall Thickness
(mm)
OD
(mm)
80 4 71 3 70
90 5 79 4 79
100 5 89 5 89
110 5 99 5 99
120 5 109 5 109
130 7 115 7 115
150 7 135 7 135
150 10 129 10 129
170 7 155 7 155
170 10 149 10 149
200 10 179 10 179
250 10 229 10 229