1,1350 Aluminum Bus Pipe Tube
1350 Aluminum Bus Pipe Tube is a commercial high-purity aluminum with 61 percent conductivity. The tensile strength of each 1350 temper is determined by the amount of work given the metal during fabrication. Today, most 1350 aluminum bus conductors are of -H111 temper for extrusions, -H112 for sawed rolled plate, and -F for cast bars
1) Implementation standard: GB/T27676-2011 aluminum and aluminum alloy bus tube pipe conductor or ASTM B 317M-07
2) Product Alloy: 1350
3) Product Temper: Any temper
4) The product is hollow tubular structure with glossy surface, beautiful appearance and uniform size.
5)The outer diameter is from 60mm to 450mm.
6)The Wall thickness from 3mm to 15mm.
7) The length of a single bus tube pipe conductor can reach up to 15 meters.
2.The Chemical composition and Mechanical properties of 1350 Aluminum Bus Pipe Tube
3.The external diameter allowable deviation and wall thickness allowable deviation of
1350 Aluminum Bus Pipe Tube
3.1 The external diameter allowable deviation (unit: mm)
3.2 The Wall thickness allowable deviation (unit: mm)
4.The main performance of 1350 Aluminum Bus Pipe Tube as follows:
1)1350 Aluminum Bus Pipe Tube adopts hot-top casting seamless pipe tube etc a series of advanced technology, with smooth surface, high dimensional accuracy, high tensile strength, not easy to discharge and deformation, low power loss, equivalent to 40% of rectangular bus and cable;
2) 1350 Aluminum Bus Pipe Tube has excellent machining, welding, conducting and heat resistance. The products were certified by the science and technology department and reached the international advanced level.
3) The convection heat dissipation condition is good, the temperature rise is low, the loss is small, the electrical conductivity is strong, the carrying capacity is big.
4) The installation area is small, and the combined busbar is the 1/3 of the soft conductor installation area.
5) The inner grain structure is compact, the corrosion resistance is strong,and it is not easy to ice coating, the ability to resist disasters is strong, and the service life is long.
6) Easy installation, beautiful appearance, safe, stable and reliable operation, convenient for maintenance.
5.The usage of 1350 Aluminum Bus Pipe Tube :
1350 Aluminum Bus Pipe Tube is mainly used as overcurrent conductor in power construction projects, such as conductor connection between power grid transmission conductor and transformer substation, jumper in transmission line, connection conductor in power equipment and high current DC ice melting device,It is a new conductor to replace the traditional rectangular, groove, bar-shaped bus and soft conductor.
It is one of the key equipment (materials) in power transmission and transformation system, and plays a vital role in the safe and reliable operation of power transmission and transformation system and power equipment.
6,Common tubular busbar, Liner tube & sealing ball size or sealing cover size.
1350 Aluminum Bus Pipe Tube is a commercial high-purity aluminum with 61 percent conductivity. The tensile strength of each 1350 temper is determined by the amount of work given the metal during fabrication. Today, most 1350 aluminum bus conductors are of -H111 temper for extrusions, -H112 for sawed rolled plate, and -F for cast bars
1) Implementation standard: GB/T27676-2011 aluminum and aluminum alloy bus tube pipe conductor or ASTM B 317M-07
2) Product Alloy: 1350
3) Product Temper: Any temper
4) The product is hollow tubular structure with glossy surface, beautiful appearance and uniform size.
5)The outer diameter is from 60mm to 450mm.
6)The Wall thickness from 3mm to 15mm.
7) The length of a single bus tube pipe conductor can reach up to 15 meters.
2.The Chemical composition and Mechanical properties of 1350 Aluminum Bus Pipe Tube
| Alloy | Chemical component(%) | ||||||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Zn | V+Ti | Ca | B | Other | Al | ||
| Each | Total | ||||||||||||
| 1350 | ≤0.10 | ≤0.40 | ≤0.05 | ≤0.01 | - | ≤0.01 | ≤0.05 |
≤ 0.02 |
≤0.03 | ≤0.05 | ≤0.03 | ≤0.10 | 99.50 |
| Property | 1350 Any Temper |
| Thermal Conductivity W/mK (typical) | 234 |
| Thermal Conductivity watts/sq.in/in/°C | 5.9 / 6.0 |
|
Electrical Conductivity percent IACS at 20°C (c) |
61 / 62 |
|
Electrical Resistivity(dc) at 20°C (68°F) micorohms/sq.in/ft (d) |
13.35 / 13.14 |
|
Temperature coefficient of electrical resistance at 20°C/°C (e) |
.00403 / .00410 |
3.The external diameter allowable deviation and wall thickness allowable deviation of
1350 Aluminum Bus Pipe Tube
3.1 The external diameter allowable deviation (unit: mm)
| Nominal external diameter | >50～75 | >75～120 | >120～150 | >150～200 | >200～250 |
| Normal level ± | 0.23 | 0.30 | 0.40 | 0.60 | 0.80 |
| High Precision level ± | 0.15 | 0. 20 | 0.30 | 0.50 | 0.70 |
3.2 The Wall thickness allowable deviation (unit: mm)
| Nominal Wall Thickness | >3.0～4.0 | >4.0～5.0 | >5.0～8.0 | >8.0～10 | >10～15 | |
|
Average wall thickness and Nominal Wall Thickness ± |
Normal level | 0.30 | 0.40 | 0.50 | 0.70 | 0.80 |
| High Precision level | 0.15 | 0.15 | 0.20 | 0.30 | 0.40 | |
|
Any wall Thickness and Nominal Wall Thickness ± |
Normal level | 0.40 | 0.50 | 0.60 | 0.80 | 1.00 |
| High Precision level | 0.20 | 0.20 | 0.30 | 0.40 | 0.50 | |
4.The main performance of 1350 Aluminum Bus Pipe Tube as follows:
1)1350 Aluminum Bus Pipe Tube adopts hot-top casting seamless pipe tube etc a series of advanced technology, with smooth surface, high dimensional accuracy, high tensile strength, not easy to discharge and deformation, low power loss, equivalent to 40% of rectangular bus and cable;
2) 1350 Aluminum Bus Pipe Tube has excellent machining, welding, conducting and heat resistance. The products were certified by the science and technology department and reached the international advanced level.
3) The convection heat dissipation condition is good, the temperature rise is low, the loss is small, the electrical conductivity is strong, the carrying capacity is big.
4) The installation area is small, and the combined busbar is the 1/3 of the soft conductor installation area.
5) The inner grain structure is compact, the corrosion resistance is strong,and it is not easy to ice coating, the ability to resist disasters is strong, and the service life is long.
6) Easy installation, beautiful appearance, safe, stable and reliable operation, convenient for maintenance.
5.The usage of 1350 Aluminum Bus Pipe Tube :
1350 Aluminum Bus Pipe Tube is mainly used as overcurrent conductor in power construction projects, such as conductor connection between power grid transmission conductor and transformer substation, jumper in transmission line, connection conductor in power equipment and high current DC ice melting device,It is a new conductor to replace the traditional rectangular, groove, bar-shaped bus and soft conductor.
It is one of the key equipment (materials) in power transmission and transformation system, and plays a vital role in the safe and reliable operation of power transmission and transformation system and power equipment.
6,Common tubular busbar, Liner tube & sealing ball size or sealing cover size.
| Main Bus Pipe Tube | Liner Bus Pipe Tube |
Sealing ball or Sealing cover |
||
|
OD (mm) |
Wall Thickness (mm) |
OD (mm) |
Wall Thickness (mm) |
OD (mm) |
| 80 | 4 | 71 | 3 | 70 |
| 90 | 5 | 79 | 4 | 79 |
| 100 | 5 | 89 | 5 | 89 |
| 110 | 5 | 99 | 5 | 99 |
| 120 | 5 | 109 | 5 | 109 |
| 130 | 7 | 115 | 7 | 115 |
| 150 | 7 | 135 | 7 | 135 |
| 150 | 10 | 129 | 10 | 129 |
| 170 | 7 | 155 | 7 | 155 |
| 170 | 10 | 149 | 10 | 149 |
| 200 | 10 | 179 | 10 | 179 |
| 250 | 10 | 229 | 10 | 229 |
